55.0601 Error , Turn off then turn on Printer HP color laserjet CP5225
55.0601 Error , Turn off then turn on Printer HP color laserjet CP5225
55.0601 Error = DC controller NVRAM data error
Note :
Turn the product off and on.
If the problem remains,
replace the DC controller
PCA.
Note Error : :
55.0 DC controller communication error
55.0601 DC controller NVRAM data error
55.0602 DC controller NVRAM access error
55.1 DC controller memory error
Service Action :
-Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize.
-If a surge protector is used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn on the printer.
-Check connection Board DC controller and the Formatter .
-If the message persists, contact HP support.
-You need to first check the connection between the dc controller and the formatter and if the connection is fine you need to replace the dc controller.
55.0601 Error = DC controller NVRAM data error
Note :
Turn the product off and on.
If the problem remains,
replace the DC controller
PCA.
Note Error : :
55.0 DC controller communication error
55.0601 DC controller NVRAM data error
55.0602 DC controller NVRAM access error
55.1 DC controller memory error
Service Action :
-Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize.
-If a surge protector is used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn on the printer.
-Check connection Board DC controller and the Formatter .
-If the message persists, contact HP support.
-You need to first check the connection between the dc controller and the formatter and if the connection is fine you need to replace the dc controller.
Reset untuk Error "Check Ink U130/U162/U163" pada printer Canon
Error "Check Ink U130/U162/U163" pada printer Canon akan menyebabkan printer Tidak berfungsi dan semua panel tidak berfungsi/alarm , error ini biasanya terjadi apabila Cartidge Printer Canon terisi tinta modifikasi / Infus / Refil . Error jenis ini mengindikasikan : "Ink may have run out" Artinya sensor yg terpasang pada printer tersebut mendeteksi bahwa cartridge yang terpasang tidak berisi tinta orsinil alias berisi tinta Aspal.
Cara untuk mengatasinya :
1. Cara paling OK , beli dan pasang Cartridge yang baru dan original. Pasti oke.
2. Cara yang murah : Tekan dan tahan tombol "stop/reset" sekitar 5 detik , kemudian
lepaskan. Biasanya printer langsung bisa bekerja normal.
3. Atau tekan Tombol back + Ok di bawah Display/Layarnya + tombol reset/stop printer tekan dan tahan
bersama-sama selama 5 detik.
Silahkan mencoba, semoga berhasil.
Cara untuk mengatasinya :
1. Cara paling OK , beli dan pasang Cartridge yang baru dan original. Pasti oke.
2. Cara yang murah : Tekan dan tahan tombol "stop/reset" sekitar 5 detik , kemudian
lepaskan. Biasanya printer langsung bisa bekerja normal.
3. Atau tekan Tombol back + Ok di bawah Display/Layarnya + tombol reset/stop printer tekan dan tahan
bersama-sama selama 5 detik.
Silahkan mencoba, semoga berhasil.
Reset / Clear Error "Check Ink 1688 blk printer Canon MX457
Error "Check Ink 1688 blk " akan menyebabkan printer hang dan semua panel tidak berfungsi/alarm , error ini biasanya terjadi apabila Cartidge Printer Canon terisi tinta modifikasi / Infus / Refil . Error jenis ini mengindikasikan : "Ink may have run out" atau "The remaining level of the ink tank cannot be correctly detected." Artinya sensor yg terpasang pada printer tersebut mendeteksi bahwa cartridge yang terpasang tidak berisi tinta orsinil alias berisi tinta Aspal.
Cara untuk mengatasinya :
1. Cara paling OK , beli dan pasang Cartridge yang baru dan original. Pasti oke.
2. Cara yang murah : Tekan dan tahan tombol "stop/reset" sekitar 5 detik , kemudian
lepaskan. Biasanya printer langsung bisa bekerja normal.
3. Atau tekan Tombol back + Ok di bawah Display/Layarnya + tombol reset/stop printer tekan dan tahan
bersama-sama selama 5 detik.
Silahkan mencoba, semoga berhasil.
Cara untuk mengatasinya :
1. Cara paling OK , beli dan pasang Cartridge yang baru dan original. Pasti oke.
2. Cara yang murah : Tekan dan tahan tombol "stop/reset" sekitar 5 detik , kemudian
lepaskan. Biasanya printer langsung bisa bekerja normal.
3. Atau tekan Tombol back + Ok di bawah Display/Layarnya + tombol reset/stop printer tekan dan tahan
bersama-sama selama 5 detik.
Silahkan mencoba, semoga berhasil.
Error E202-0002 Printer Canon MF4450
Turn The Main Power On Error E202-0002 , Printer Canon mf 4450 :
E202-0002 : this error means you scanner is not going back to starting position which is the left side of the glass flat bed.
Open your scanner and clean & lubricate rail.
You must loser two upper screw and two down screw before you open Scanner Asy.
Clean glass lamp scanner,
Clean and Lubicate rail.
It might also be off alignment try to gentle move it back to starting position. If you still get the error once swithed on then your sensor might be broke.
E202-0002 : this error means you scanner is not going back to starting position which is the left side of the glass flat bed.
Open your scanner and clean & lubricate rail.
You must loser two upper screw and two down screw before you open Scanner Asy.
Clean glass lamp scanner,
Clean and Lubicate rail.
It might also be off alignment try to gentle move it back to starting position. If you still get the error once swithed on then your sensor might be broke.
HP Laserjet P2055dn error 84 Error 1D31 Turn off then on
HP Laserjet P2055dn error 84 Error 1D31 Turn off then on
1.The firmware is corrupted, formatter (mainboard) on the printer is damaged, there is nothing you can do to fix it.
2. Unplug conector Formatter / Mainboard and clean up conector and Formatter / Mainboard.
3.The P2055n follows the P2015n platform but uses an Embedded JetDirect (JDI) system to provide network access. Therefore network support for the P2055n is more like other JDI printers such as the LJ4250 rather than its predecessor, the P2015.
Error Reporting
Because an Embedded JetDirect system shares all resources, including memory and CPU cycles, with the printer, JDI failures can be difficult to distinguish from printer failures. However, JDI failures usually only manifest in one of the following three ways:
84.xxxx Service Errors are exclusively JDI failures generated when the JDI firmware detects an unrecoverable situation
49.xxxx Service Errors are low-level failures generated by the operating system underlying the printer and JDI firmware systems -- a given 49.xxxx service error can originate in either JDI or printer firmware
System Hang in which no error is displayed, but the printer is unresponsive both to button presses and the network.
The Service Errors noted above are displayed on the Control Panel at the time of the failure and are also recorded in the printerâ s Event Log. The Event Log can be accessed via the EWS under the Status tab and Event Log section.
Enabling/Disabling JDI on the P2055n
Under certain circumstances, it may be desirable to run without JDI as a diagnostic test, or as an alternate mode, for example for stronger security.
4.To enable/disable JDI, perform the following steps:
With Printer at READY , select OK .
Press both the Down arrow and Cancel key.
Printer displays READY .
Press OK .
Printer displays 2ndary Service .
Press OK .
Scroll and select Embedded Network .
Scroll and select either On or OFF .
top
5.Firmware upgrades
CPE releases
Periodically revisions are made to the P2055â s firmware system. These CPE revisions contain cumulative updates and fixes to both the printer and the JDI firmware in a single package.
The production of the CPE revisions is a joint effort between the printer and JDI teams, usually lead by the printer teams. Normally the JDI team provides fully tested versions in advance of the printer teamâ s scheduled releases.
Interim Releases
In a change from past designs, the JDI does not implement its own firmware download mechanism and relies solely on the printerâ s Remote Firmware Upgrade (RFU) mechanism. Though this reduces some redundant functionality, it complicates the long-standing JDI advantage of quickly delivering an â Interim Releaseâ that contains only a small but critical fix for one customer.
Instead, since each firmware upgrade must contain a full complement of printer code, any upgrade will necessarily change all the firmware in the printer. Thus, though we will continue to provide Interim Releases of JDI firmware, they will be based on the latest JDI version and moreover be accompanied by the latest printer firmware. Generally we do not expect this to be a problem, but in certain cases, a customer may be surprised or even unhappy with changes in the printerâ s behavior.
6. Any Problem The firmware is corrupted, formatter (mainboard) on the printer is damaged, there is nothing you can do to fix it.
3.The P2055n follows the P2015n platform but uses an Embedded JetDirect (JDI) system to provide network access. Therefore network support for the P2055n is more like other JDI printers such as the LJ4250 rather than its predecessor, the P2015.
Error Reporting
Because an Embedded JetDirect system shares all resources, including memory and CPU cycles, with the printer, JDI failures can be difficult to distinguish from printer failures. However, JDI failures usually only manifest in one of the following three ways:
84.xxxx Service Errors are exclusively JDI failures generated when the JDI firmware detects an unrecoverable situation
49.xxxx Service Errors are low-level failures generated by the operating system underlying the printer and JDI firmware systems -- a given 49.xxxx service error can originate in either JDI or printer firmware
System Hang in which no error is displayed, but the printer is unresponsive both to button presses and the network.
The Service Errors noted above are displayed on the Control Panel at the time of the failure and are also recorded in the printerâ s Event Log. The Event Log can be accessed via the EWS under the Status tab and Event Log section.
Enabling/Disabling JDI on the P2055n
Under certain circumstances, it may be desirable to run without JDI as a diagnostic test, or as an alternate mode, for example for stronger security.
4.To enable/disable JDI, perform the following steps:
With Printer at READY , select OK .
Press both the Down arrow and Cancel key.
Printer displays READY .
Press OK .
Printer displays 2ndary Service .
Press OK .
Scroll and select Embedded Network .
Scroll and select either On or OFF .
top
5.Firmware upgrades
CPE releases
Periodically revisions are made to the P2055â s firmware system. These CPE revisions contain cumulative updates and fixes to both the printer and the JDI firmware in a single package.
The production of the CPE revisions is a joint effort between the printer and JDI teams, usually lead by the printer teams. Normally the JDI team provides fully tested versions in advance of the printer teamâ s scheduled releases.
Interim Releases
In a change from past designs, the JDI does not implement its own firmware download mechanism and relies solely on the printerâ s Remote Firmware Upgrade (RFU) mechanism. Though this reduces some redundant functionality, it complicates the long-standing JDI advantage of quickly delivering an â Interim Releaseâ that contains only a small but critical fix for one customer.
Instead, since each firmware upgrade must contain a full complement of printer code, any upgrade will necessarily change all the firmware in the printer. Thus, though we will continue to provide Interim Releases of JDI firmware, they will be based on the latest JDI version and moreover be accompanied by the latest printer firmware. Generally we do not expect this to be a problem, but in certain cases, a customer may be surprised or even unhappy with changes in the printerâ s behavior.
6. Any Problem The firmware is corrupted, formatter (mainboard) on the printer is damaged, there is nothing you can do to fix it.
Resetter Epson Stylus Photo R300 / R310 / R320
Resetter Epson Stylus Photo R300 / R310 / R320
1. Download SSC Service Utility and Software in Here , unzip file and instal your computer.
2. Click SSC Service Utility.
3. Choose configuration printer.
4.Close program (x).
5.Click / right click above icon ssc service utility.
6. Choose Reset Counter, reset all counter.
7. Choose Protection Counter , Reset Protection Counter and Clear Counter Overflow and then Exit.
8. Please Restate computer.
9. Printer will initial and reset waste ink counter .
1. Download SSC Service Utility and Software in Here , unzip file and instal your computer.
2. Click SSC Service Utility.
3. Choose configuration printer.
4.Close program (x).
5.Click / right click above icon ssc service utility.
6. Choose Reset Counter, reset all counter.
7. Choose Protection Counter , Reset Protection Counter and Clear Counter Overflow and then Exit.
8. Please Restate computer.
9. Printer will initial and reset waste ink counter .
Resetter Epson R220 , R230
Resetter Epson R220 , R230
1. Download SSC Service Utility and software Reset in Here ... , unzip file and instal your computer.
2. Click SSC Service Utility.
3. Choose configuration printer.
4.Close program (x).
5.Click / right click above icon ssc service utility.
6. Choose Reset Counter, reset all counter.
7. Choose Protection Counter , Reset Protection Counter and Clear Counter Overflow and then Exit.
8. Please Restate computer.
9. Printer will initial and reset waste ink counter .
1. Download SSC Service Utility and software Reset in Here ... , unzip file and instal your computer.
2. Click SSC Service Utility.
3. Choose configuration printer.
4.Close program (x).
5.Click / right click above icon ssc service utility.
6. Choose Reset Counter, reset all counter.
7. Choose Protection Counter , Reset Protection Counter and Clear Counter Overflow and then Exit.
8. Please Restate computer.
9. Printer will initial and reset waste ink counter .
